Page 1 of 1
Posted: Fri Mar 03, 2006 9:49 pm
by Point
Just checking to see where I should post concerns on the new stuff... some great work... and some great advances but some of the changes seem to be tweaking and breaking what im working on....
What the 273 and 1.52 tool limits
im getting errors that i didnt get in older versions of loathing... and in map tests... :0
Posted: Fri Mar 03, 2006 10:10 pm
by PT
seems unit definitions limit went down to around 50.... I needed it at least 64 with the high side being 128... not sure this is a change or just something thats revealed... by 1.52 in anycase help would be appreciated on this...
Posted: Fri Mar 03, 2006 10:58 pm
by Myrd
In the new Loathing, you can select "Mesh Limits..." from the Mesh menu to see the actual limits.
Posted: Sat Mar 04, 2006 12:24 pm
by Point
thanks myrd..... says im at 512 unit definitions but i dont have 512 units types or even units on the mesh... so how is this calculated... must take 10 definitions per unit or something is jacked.
Posted: Sat Mar 04, 2006 1:00 pm
by Point
i posted under technical support somthing similar
512 limit wipes out 8 of my units from each of my multi player maps
and 512 limit wipes out 40 units from my test maps
64 x 9 =576
128 x 9 =1152 great new limit would be 1800 to cover all the possiblities
:p
Posted: Sat Mar 04, 2006 1:01 pm
by Point