Page 1 of 1

Posted: Sat Mar 04, 2006 12:48 pm
by Point
Ive been working on 4 tagsets for months I started with a base of 16 light and 16 dark units with 1.4 and 1.5 i found i could go to 32 light and 32 dark so i did and myth was good now in loathing 1.52 most of my units disapear the limits are all way under except for unit definitions... it seems it takes 9 to 10 unit definitions for each unit so the 512 limit is too low ... please bump this back up or up to at least 640 for my maps to work.. and if your feeling charitable up it to 1024 to 1800 to allow my test map with all the units on them to work. :( thanks..

Posted: Sat Mar 04, 2006 1:06 pm
by Point
i posted under technical support somthing similar


512 limit wipes out 8 of my units from each of my multi player maps

and 512 limit wipes out 40 units from my test maps

64 x 9 =576
128 x 9 =1152 great new limit would be 1800 to cover all the possiblities
:p